custom police patches for vests

Standard police patches for tactical vests typically measure 2x3 inches to 4x6 inches depending on placement location and vest panel size. Chest identification patches usually measure 2x3 or 3x4 inches to fit on front plate carrier panels. Shoulder patches range from 3x3 to 4x4 inches. Large back panel patches can measure up to 8x10 inches for department identification visible during crowd control. Blood type patches are commonly 2x2 or 2x3 inches. Name tags typically measure 1x4 to 1.5x4.5 inches with letter heights of at least 0.5 inches for readability.

Custom police velcro patches cost $2.50 to $8 per patch depending on size, complexity, and order quantity. Simple 2x3 inch text patches start around $2.50 each in quantities of 100 or more. Standard 3x4 inch department patches with logos cost $4 to $6 each. Large 4x6 inch or complex multi colour designs range from $6 to $8 per unit. PVC patches typically cost $4 to $10 each due to specialised manufacturing. Bulk orders of 250 or more patches receive volume discounts of 30 to 40 percent off base pricing.

PVC police patches are made from flexible rubber material offering superior weather resistance, easy cleaning, and three dimensional design capabilities. They perform better in rain and wet conditions than embroidered patches. PVC patches are ideal for exterior vest applications and harsh environments. Embroidered patches use thread on fabric backing providing traditional law enforcement appearance preferred for dress uniforms. Embroidered patches offer fine detail work and text clarity but require more maintenance. Many departments use PVC for tactical operations and embroidered patches for administrative duties.

Quality velcro patches using military grade hook backing maintain secure attachment during physical confrontations when properly applied to appropriate loop panels. The hook and loop system is designed for tactical applications and tested under stress conditions. Patches should cover at least 50% of their surface area with hook backing for maximum grip. Loop panels on vests must be securely sewn with reinforced stitching. Proper velcro maintenance including removing lint and debris ensures continued adhesion. Most patch losses result from inadequate loop panel quality rather than patch backing failure.

Velcro patches attach to loop panels sewn onto tactical vests and plate carriers. Simply press the hook backing on the patch firmly against the loop panel surface ensuring complete contact across the entire patch. Press down for several seconds to engage the hook and loop connection. The patch should resist pulling with moderate force. To remove, peel the patch starting from one corner. Avoid yanking patches off quickly as this can damage the loop panel fabric. Clean both hook and loop surfaces periodically to maintain adhesion by removing lint, dust, and debris with a stiff brush.

Infrared reflective patches are not universally required but are increasingly common for tactical operations involving night vision equipment. IR patches reflect infrared light visible through night vision goggles while remaining subdued to the naked eye in normal lighting. This allows team members to identify each other in darkness without compromising tactical advantage. SWAT teams, tactical response units, and military style operations often specify IR reflective patches for low light identification. Standard visible patches work for daytime operations and community policing where night vision equipment is not used.